[참조]

Abaqus Analysis User's Manual(6.10), DS Simulia
http://130.149.89.49:2080/v6.10/books/usb/default.htm?startat=pt06ch24s01abo23.html

 
(1) 편
(2) 장
(3) 목차

 

---

 

아바쿠스의  사용자 설명서(Abaqus Analysis User's Manual)

(1) 편
"아바쿠스 사용자 설명서(Abaqus Analysis User's Manual)"는 9개 편(관련 장)으로 구성되어 있다.

• 1편: 소개, 모델링, 실행(Introduction, Spatial Modeling, and Execution): 1,2,3장
• 2편: 결과(Output): 4,5장
• 3편: 해석 절차, 해석 제어(Analysis Procedures, Solution, and Control): 6,7장
• 4편: 해석 기법(Analysis Techniques): 8,9,10,11,12,13,14,15,16,17장
• 5편: 재료(Materials): 18,19,20,21,22,23장
• 6편: 요소(Elements): 24,25,26,27,28,29장
• 7편: 경계조건(Prescribed Conditions): 30장
• 8편: 구소조건(Constraints): 31장
• 9편: 접촉문제(Interactions): 32,33,34,35,36,37장
• A편: 변수/요소 색인(Output Variable and Element Indexes)

 
(2) 장
"아바쿠스 사용자 설명서(Abaqus Analysis User's Manual)"는 37장으로 구성되어 있다.

---1편: 소개, 모델링, 실행

• 1장. 소개(Introduction)
• 2장. 모델링(Spatial Modeling)
• 3장. 실행(Job Execution)

---2편: 결과

• 4장. 결과(Output)
• 5장. 출력 양식(File Output Format)

---3편: 해석 절차, 해석 제어

• 6장. 해석 절차(Analysis Procedures)
• 7장. 해석 제어(Analysis Solution and Control)

---4편: 해석 기법

• 8장. 개요(Analysis Techniques: Introduction)
• 9장. 연속 해석(Analysis Continuation Techniques)
• 10장. 모델링 요약(Modeling Abstractions)
• 11장. 특수해석 기법(Special-Purpose Techniques)
• 12장. 적응 기법A(daptivity Techniques)
• 13장. 오일러 해석(Eulerian Analysis)
• 14장. 다중물리 해석(Multiphysics Analyses)
• 15장. 사용자 정의 함수(Extending Abaqus Analysis Functionality)
• 16장. 설계 민감도 해석(Design Sensitivity Analysis)
• 17장. 매개변수해석(Parametric Studies)

---5편: 재료

• 18장. 개요(Materials: Introduction)
• 19장. 탄성(Elastic Mechanical Properties)
• 20장. 비탄성(Inelastic Mechanical Properties)
• 21장. 진행형 손상과 파괴(Progressive Damage and Failure)
• 22장. 동수역학(Hydrodynamic Properties)
• 23장. 기타(Other Material Properties)

---6편: 요소

• 24장. 개요(Elements: Introduction)
• 25장. 연속체(Continuum Elements)
• 26장. 구조체(Structural Elements)
• 27장. 관성/강체/전기(Inertial, Rigid, and Capacitance Elements)
• 28장. 연결(Connector Elements)
• 29장. 특수 목적(Special-Purpose Elements)

---7편: 경계조건

• 30장. 경계(Prescribed Conditions)

---8편: 구소조건

• 31장. 구속(Constraints)

---9편: 접촉문제

• 32장. 정의(Defining Contact Interactions)
• 33장. 성질(Contact Property Models)
• 34장. 기법(Contact Formulations and Numerical Methods)
• 35장. Q&A(Contact Difficulties and Diagnostics)
• 36장. 요소(Contact Elements in Abaqus/Standard)
• 37장. 열전달(Defining Cavity Radiation in Abaqus/Standard)

---A편: 변수/요소 색인

• 변수(Variable Index)
• 요소(Element Index)

 

 

(3) 목차
Introduction, Spatial Modeling, and Execution
     1 Introduction
          1.1 Introduction
          1.2 Abaqus syntax and conventions
          1.3 Abaqus model definition
          1.4 Parametric modeling
     2 Spatial Modeling
          2.1 Node definition
          2.2 Element definition
          2.3 Surface definition
          2.4 Rigid body definition
          2.5 Integrated output section definition
          2.6 Nonstructural mass definition
          2.7 Distribution definition
          2.8 Display body definition
          2.9 Assembly definition
          2.10 Matrix definition
     3 Job Execution
          3.1 Execution procedures: overview
          3.2 Execution procedures
          3.3 Environment file settings
          3.4 Managing memory and disk resources
          3.5 Parallel execution
          3.6 File extension definitions
          3.7 FORTRAN unit numbers
Output
     4 Output
          4.1 Output
          4.2 Output variables
          4.3 The postprocessing calculator
     5 File Output Format
          5.1 Accessing the results file
Analysis Procedures, Solution, and Control
     6 Analysis Procedures
          6.1 Introduction
          6.2 Static stress/displacement analysis
          6.3 Dynamic stress/displacement analysis
          6.4 Steady-state transport analysis
          6.5 Heat transfer and thermal-stress analysis
          6.6 Fluid dynamic analysis
          6.7 Electrical analysis
          6.8 Coupled pore fluid flow and stress analysis
          6.9 Mass diffusion analysis
          6.10 Acoustic and shock analysis
          6.11 Abaqus/Aqua analysis
          6.12 Annealing
     7 Analysis Solution and Control
          7.1 Solving nonlinear problems
          7.2 Analysis convergence controls
Analysis Techniques
     8 Analysis Techniques: Introduction
          8.1 Introduction
     9 Analysis Continuation Techniques
          9.1 Restarting an analysis
          9.2 Importing and transferring results
     10 Modeling Abstractions
          10.1 Substructuring
          10.2 Submodeling
          10.3 Generating global matrices
          10.4 Symmetric model generation, results transfer, and analysis of cyclic symmetry models
          10.5 Meshed beam cross-sections
          10.6 Modeling discontinuities as an enriched feature using the extended finite element method
     11 Special-Purpose Techniques
          11.1 Inertia relief
          11.2 Mesh modification or replacement
          11.3 Geometric imperfections
          11.4 Fracture mechanics
          11.5 Hydrostatic fluid modeling
          11.6 Surface-based fluid modeling
          11.7 Mass scaling
          11.8 Selective subcycling
          11.9 Steady-state detection
     12 Adaptivity Techniques
          12.1 Adaptivity techniques: overview
          12.2 ALE adaptive meshing
          12.3 Adaptive remeshing
          12.4 Analysis continuation after mesh replacement
     13 Eulerian Analysis
          13.1 Eulerian analysis
     14 Multiphysics Analyses
          14.1 Co-simulation
          14.2 Sequentially coupled multiphysics analyses
     15 Extending Abaqus Analysis Functionality
          15.1 User subroutines and utilities
     16 Design Sensitivity Analysis
          16.1 Design sensitivity analysis
     17 Parametric Studies
          17.1 Scripting parametric studies
          17.2 Parametric studies: commands
Materials
     18 Materials: Introduction
          18.1 Introduction
          18.2 General properties
     19 Elastic Mechanical Properties
          19.1 Overview
          19.2 Linear elasticity
          19.3 Porous elasticity
          19.4 Hypoelasticity
          19.5 Hyperelasticity
          19.6 Stress softening in elastomers
          19.7 Viscoelasticity
          19.8 Hysteresis
          19.9 Rate sensitive elastomeric foams
     20 Inelastic Mechanical Properties
          20.1 Overview
          20.2 Metal plasticity
          20.3 Other plasticity models
          20.4 Fabric materials
          20.5 Jointed materials
          20.6 Concrete
          20.7 Permanent set in rubberlike materials
     21 Progressive Damage and Failure
          21.1 Progressive damage and failure: overview
          21.2 Damage and failure for ductile metals
          21.3 Damage and failure for fiber-reinforced composites
          21.4 Damage and failure for ductile materials in low-cycle fatigue analysis
     22 Hydrodynamic Properties
          22.1 Overview
          22.2 Equations of state
     23 Other Material Properties
          23.1 Mechanical properties
          23.2 Heat transfer properties
          23.3 Acoustic properties
          23.4 Hydrostatic fluid properties
          23.5 Mass diffusion properties
          23.6 Electrical properties
          23.7 Pore fluid flow properties
          23.8 User materials
Elements
     24 Elements: Introduction
          24.1 Introduction
              24.1.1 Element library: overview
              24.1.2 Choosing the element's dimensionality
              24.1.3 Choosing the appropriate element for an analysis type
              24.1.4 Section controls
     25 Continuum Elements
          25.1 General-purpose continuum elements
          25.2 Fluid continuum elements
          25.3 Infinite elements
          25.4 Warping elements
     26 Structural Elements
          26.1 Membrane elements
          26.2 Truss elements
          26.3 Beam elements
          26.4 Frame elements
          26.5 Elbow elements
          26.6 Shell elements
     27 Inertial, Rigid, and Capacitance Elements
          27.1 Point mass elements
          27.2 Rotary inertia elements
          27.3 Rigid elements
          27.4 Capacitance elements
     28 Connector Elements
          28.1 Connector elements
          28.2 Connector element behavior
     29 Special-Purpose Elements
          29.1 Spring elements
          29.2 Dashpot elements
          29.3 Flexible joint elements
          29.4 Distributing coupling elements
          29.5 Cohesive elements
          29.6 Gasket elements
          29.7 Surface elements
          29.8 Hydrostatic fluid elements
          29.9 Tube support elements
          29.10 Line spring elements
          29.11 Elastic-plastic joints
          29.12 Drag chain elements
          29.13 Pipe-soil elements
          29.14 Acoustic interface elements
          29.15 Eulerian elements
          29.16 User-defined elements
Prescribed Conditions
     30 Prescribed Conditions
          30.1 Overview
          30.2 Initial conditions
          30.3 Boundary conditions
          30.4 Loads
          30.5 Prescribed assembly loads
          30.6 Predefined fields
Constraints
     31 Constraints
          31.1 Overview
          31.2 Multi-point constraints
          31.3 Surface-based constraints
          31.4 Embedded elements
          31.5 Element end release
          31.6 Overconstraint checks
Interactions
     32 Defining Contact Interactions
          32.1 Overview
          32.2 Defining general contact in Abaqus/Standard
          32.3 Defining contact pairs in Abaqus/Standard
          32.4 Defining general contact in Abaqus/Explicit
          32.5 Defining contact pairs in Abaqus/Explicit
     33 Contact Property Models
          33.1 Mechanical contact properties
          33.2 Thermal contact properties
          33.3 Electrical contact properties
          33.4 Pore fluid contact properties
     34 Contact Formulations and Numerical Methods
          34.1 Contact formulations and numerical methods in Abaqus/Standard
          34.2 Contact formulations and numerical methods in Abaqus/Explicit
     35 Contact Difficulties and Diagnostics
          35.1 Resolving contact difficulties in Abaqus/Standard
          35.2 Resolving contact difficulties in Abaqus/Explicit
     36 Contact Elements in Abaqus/Standard
          36.1 Contact modeling with elements
          36.2 Gap contact elements
          36.3 Tube-to-tube contact elements
          36.4 Slide line contact elements
          36.5 Rigid surface contact elements
     37 Defining Cavity Radiation in Abaqus/Standard
          37.1 Defining cavity radiation
Output Variable and Element Indexes
          Abaqus/Standard Output Variable Index
          Abaqus/Explicit Output Variable Index
          Abaqus/Standard Element Index
          Abaqus/Explicit Element Index